LILNIAGY HT-TY-10, a plug-and-play snowflake projector
The LILNIAGY HT-TY-10 is the simplest projector in our lineup: two heads, an IP65 housing, and nothing to set. It switches on when you plug it in and off when you unplug it. We did not run one ourselves, so this review sets the listing and its spec table against the owner review summary.
Plug and play
Our verdict
The HT-TY-10 is a plain double-head projector that owners like for its looks, its brightness and its price. The housing is IP65, the spec table lists UL, and it mounts on a wall, a stake or straight on the lawn. It has no remote and no timer, and the seller states neither a coverage area nor a projection distance, so you supply the timing and guess the reach. Add an outdoor-rated plug-in timer and it does the job well for a modest wall.
Strengths
- IP65 housing on the projector
- Owners praise brightness and value
- Wall, ground or lawn-stake mounting
- UL listed per the Amazon spec table
- Nothing to pair or program
Weaknesses
- No remote and no timer listed
- No coverage area or distance stated by the seller
- Spec table says 8 light sources, bullets say 12 beads
- Some owners find it cannot cover a whole house
- Warranty not stated on the listing
Buy it if
you want a bright, simple double-head projector for one wall and are happy to add your own outdoor plug-in timer.
Skip it if
you want to switch the display from inside the house, or you need a published coverage figure for a wide frontage.
Specs: LILNIAGY HT-TY-10 Double-Head
| Type | Double-head LED snowflake projector, moving snowflakes and snowfall |
|---|---|
| Model | HT-TY-10 (maker GuangDong HONDU) |
| Light source | 12 LED beads per the bullets (the spec table says 8 light sources) |
| Heads | Two, each adjustable through 360° |
| Coverage | Not stated by the seller; owners report up to about 400 sq ft |
| Beam angle | 120° per the spec table |
| Control | None listed: it runs when plugged in (no remote, no timer named on the listing) |
| Weather rating | IP65 housing, IP44 adapter |
| Mounting | Wall, ground stake or lawn |
| Size and weight | 6.6 × 3.5 × 5.5 in, about 1 lb |
| Certification | UL listed in the spec table |
Data from the Amazon listing, its spec table and the maker where available. Price band $: under $30. Only the price Amazon shows at checkout counts.
Snowflakes and falling snow from two heads
The HT-TY-10 is a double-head LED projector that shows moving snowflakes along with a snowfall effect. Each head adjusts through 360°, so you can split them across two walls or stack both on one.
The listing bullets give 12 LED beads, while the spec table lists 8 light sources. That gap is common on these listings and does not tell you how bright it looks, but we would rather report both figures than pick one.
The seller states no coverage area at all. A single owner puts its reach at roughly 400 sq ft, a helpful hint, though one report is a long way from a rating.
Owners also mention using it indoors, aimed at a ceiling or a bare wall. That makes it a flexible choice if you want one projector for the porch and the playroom.
Other owners say it does not cover a whole house, which fits what two small heads can do. Think of it as a projector for one wall, a garage door or a front porch, not for a wide frontage.
A 120° beam and no stated distance
The spec table gives a 120° beam angle, a wide spread for a cheap projector. A wide beam fills a wall from fairly close, but it also spreads the light thin if you move the stake far back.
With no distance on the listing, borrow the 16 to 33 ft range most double-heads suggest. Start near the short end, then ease back until the flakes cover the wall but still look crisp.
Owners call it bright, which matches a two-head unit aimed at a pale surface. White siding or a garage door works far better than dark brick, and any porch light or street lamp nearby will wash the snowflakes out.
Our guide to projection distance explains why stepping back makes the flakes bigger and dimmer. Finding the right spot takes one evening of walking the stake back and forth.
No remote, no timer, no settings
The LILNIAGY listing names no remote and no timer. It runs when it has power, so every night you either walk out to unplug it or let something else do the switching.
The easy fix is an outdoor-rated plug-in timer or a dusk-to-dawn switch between the outlet and the adapter. That gives you an automatic schedule for a small extra cost and keeps you off the cold lawn at midnight.
The upside is that nothing can fail to pair. There is no remote battery to forget, and no blinking light to decode, which suits anyone who wants to plug it in and forget it.
If the outdoor outlet sits on a switched circuit, the wall switch inside can serve as a simple on and off. That is the closest thing to a remote this projector has.
If you would rather control it from the house, look at the GUSODOR SW-TY-002, which adds an RF remote and two timer styles in the same price band. Our timer and remote guide compares every option.
IP65 housing, IP44 adapter, UL in the spec table
The housing carries IP65, so rain and snow can hit it from any side, while the adapter is only IP44. That makes the adapter the part to protect, ideally raised on a hook inside a covered connection box.
The spec table also lists UL along with the two IP ratings. The listing does not say which part carries the UL mark, so look for it on the adapter when the box arrives.
At 15.8 oz, it is small and light, measuring roughly 6.6 × 3.5 × 5.5 in. The maker is listed as GuangDong HONDU, and the seller gives no warranty period, so the Amazon return window is your safety net.
Snow is the other risk. A low-mounted projector can be buried by a drift, so set the stake high or move it to the wall before a big storm.
Wall, ground or lawn stake
The listing gives three ways to set it up: screwed to a wall, standing on the ground, or pushed into the lawn on its stake. That covers most front yards and porches.
On a stake, keep the head above where snow drifts, and make a pilot hole first if the ground has frozen. On a wall, mount it under an eave so the adapter connection stays dry.
The seller does not state the cord length, so measure the run from your outdoor outlet before you order. Use only extension cords marked for outdoor use, and plug into a GFCI-protected outlet.
Our setup and mounting guide covers angles, stakes and cord routing in more detail. Aim the heads at your own wall, never at the street or a neighbor’s windows.
Pretty, bright and good value, say owners
The review summary is positive on the points that matter most. Owners call the effect pretty and bright, say setup is easy, and like that it works indoors as well as out.
The main complaint is coverage. Some owners expected it to cover the whole front of a house and found it could not, which says more about the missing coverage figure than about the projector.
Value comes up again and again in the summary as a plus. For a projector in the under-$30 band, a happy owner base and few hardware complaints are a decent sign.
Against the GUSODOR and the LYHOPE
Against the GUSODOR, the hardware is close and the difference is control. Our GUSODOR vs LILNIAGY head-to-head sets the two side by side, from remote range to cord length.
The LYHOPE double-head is a touch cheaper and adds a button timer, but its body is only IP44. Our LILNIAGY vs LYHOPE comparison weighs the better seal against the built-in timer.
For a wider wall, consider the Forlivese triple-head, which brings three heads and a published coverage range. You can line all six up on the LILNIAGY’s homepage card and in our snowflake projector comparison.
For one wall and an outdoor timer
The HT-TY-10 is a bright, sealed double-head with nothing to program and a happy owner base. Pair it with an outdoor plug-in timer, aim it at one pale wall, and it gives you an evening snowfall without fuss.