Brightown star topper, a snowflake projector for the tree
The Brightown star is a lighted tree topper with a small snowflake projector inside, made for the living room rather than the lawn. It throws moving snowflakes and dots up onto the ceiling. We did not put one on a tree ourselves, so this review weighs the listing against the owner review summary.
For indoors
Our verdict
The Brightown topper is the one product here made for indoors: a 10 in gold glitter star whose four LEDs and small motor send moving snowflakes and dots across the ceiling. It is the most-reviewed product in our lineup and one of Amazon’s best-selling tree toppers, and owners like the effect. They also report a motor that whines, an image that can be small, glitter that sheds, a star that is hard to set straight on an artificial tree, and some units that quit after a couple of days. Buy it for a cozy living room ceiling, not as a substitute for an outdoor projector.
Strengths
- Tree topper and snowflake projector in one
- Moving snowflakes and dots on the ceiling
- UL-certified plug with transformer per the listing
- 8 ft lead cord, gift box
- One of Amazon’s best-selling tree toppers
Weaknesses
- Owners report a whining motor
- Image can be small, 21 to 53 sq ft at most
- Glitter sheds from the star
- Hard to set straight on artificial trees
- Some units stop after a few days
Buy it if
you want moving snowflakes on the living room ceiling and a star on top of the tree from a single plug.
Skip it if
you are sensitive to a faint motor whine in a quiet room, or you want snowflakes on the outside of the house.
Specs: Brightown Star Tree Topper Projector
| Type | Lighted 10 in hollow star tree topper with a built-in moving snowflake projector |
|---|---|
| Model | PROJ_LED_ST003 (Brightown) |
| Light source | 4 LEDs with an auto-moving motor |
| Projection | Moving snowflakes and dots, upward onto the ceiling |
| Coverage | 21 to 53 sq ft per the listing |
| Power cord | 8 ft lead, UL-certified plug with transformer |
| Use | Indoors on a Christmas tree |
| Finish | Gold glitter (some glitter can shed) |
| Packaging | Gift box |
Data from the Amazon listing, its spec table and the maker where available. Price band $: under $30. Only the price Amazon shows at checkout counts.
Moving snowflakes on the ceiling
The Brightown is a 10 in hollow gold star that sits on top of the tree, with four LEDs and a small motor inside. The motor turns the pattern, so snowflakes and dots drift slowly across the ceiling above the tree.
The listing rates the projection at 21 to 53 sq ft on the ceiling, a small patch next to the outdoor projectors. It suits a living room with a light, flat ceiling, where the flakes spread out around the tree.
Dots join the snowflakes in the pattern, which gives a softer, starry look than the outdoor projectors. The motor keeps it moving all the time, with no option listed to hold it still.
Owners report that the image can be tiny, which fits four LEDs aimed from the top of a tree. A taller tree, closer to the ceiling, gives smaller and brighter flakes, and a lower one spreads them wider and dimmer.
Our guide to snowflake projectors indoors covers ceilings, room darkness and the other options for a living room. Read it if you are torn between a topper and a stand-alone projector.
Bright enough in a dark room
Indoors, darkness does most of the work. Turn off the overhead lights and the snowflakes stand out on a white ceiling, while a lamp in the corner fades them.
Sloped or vaulted ceilings stretch the pattern on one side. A flat, white ceiling above the tree gives the most even spread of flakes.
A textured or dark ceiling breaks up the pattern. Owners who like the effect most describe it in a dark room with the tree lights low, which matches what a small projector can do.
The star itself lights up as well, so it works as a topper even with the room lights on. The ceiling show is the extra that comes out after dark.
No remote, no timer, one plug
The listing names no remote and no timer for the projector. It runs when it has power, so most people plug it into the same switch or plug-in timer as the tree lights.
Unplug it, or let a timer switch it off, at night and when nobody is home. Our safety guide covers the habits that apply to any decoration that plugs into the wall.
A plug-in timer is the easy way to give it a schedule. Set it to switch off at bedtime, so the star never runs all night by accident.
Glitter finish and a UL-certified plug
The star has a gold glitter finish, and the listing itself admits some glitter falls off. Owners mention shedding too, so expect a little sparkle on the branches and the floor beneath.
Power runs through an 8 ft lead with a UL-certified plug and transformer, per the listing. That covers the plug, not the star, which is an indoor product with no weather rating at all.
The motor is the part owners notice most, because some describe a whine that carries in a quiet room. If you watch films in the same room, that faint noise may bother you more than in a busy family space.
The star arrives in a gift box, which makes it an easy present and easy to store. Pack it back in the box after the holidays to protect the glitter.
Getting it straight on the tree
The star slips over the top branch of the tree, and owners say it goes on without fuss. Getting it to sit straight is harder, especially on artificial trees with a stiff, thin top.
A few twists of florist wire or a zip tie around the stem and the top branch hold it upright. Point the star’s face toward the room, since the projector throws its pattern upward onto the ceiling.
The 8 ft lead usually reaches an outlet behind the tree. Keep the cord along the trunk rather than across the floor, and use an indoor-rated extension cord if you need more length.
Set the star in place before you hang ornaments near the top, since straightening it later knocks them loose. Keep the transformer where air reaches it, not buried under a tree skirt or gift wrap.
Loved for the effect, doubts about lasting
The Brightown is the most-reviewed product in our lineup, and it ranks among Amazon’s best-selling tree toppers. Owners like how the snowflakes look on the ceiling and find it easy to put on.
The complaints follow a clear pattern. Some units stop after a couple of days, the motor whines, the image can be small, and glitter sheds, and our troubleshooting guide covers the checks to try before you send one back.
It ships from Amazon with free returns, sold by Brightown USA. Use it every evening for the first week, and send it back inside the return window if it stops.
Volume and sales rank tell you many people buy it, not how long each one lasts. Weigh the short-lifespan reports against that popularity.
Against the outdoor double-heads
An outdoor projector inside the house covers far more ceiling, but it does not top the tree. Our topper vs double-head comparison weighs the two for a living room.
Owners report that the LILNIAGY HT-TY-10 works indoors as well as out, and the GUSODOR SW-TY-002 adds a remote and timer you can use from the sofa. Both cover more area than the star.
An outdoor double-head on a shelf can put snowflakes on the ceiling at a larger scale. It will not light up the top of the tree, though, and it is bulkier in a living room.
For a cheaper outdoor option, the LYHOPE double-head sits in the same price band. You can compare them on the Brightown’s homepage card and in our list of the best snowflake projectors for every space.
For the living room ceiling
The Brightown puts a lit star on top of the tree and drifting flakes overhead, all from a single plug. Expect a small image and a faint motor hum, set it straight with a little wire, and enjoy it in a dark room.